Filter
Top Products
Chapter 2. Installation and Operation
2-2 T3SU 300 User Manual 61200217L1-1
Customer Provides
The customer provides an interface cable for each port used. Each
cable should be either HSSI or V.35.
Power Up
Each T3SU 300 unit is provided with a captive eight-foot power
cord, terminated by a three-prong plug which connects to a
grounded 115 VAC power receptacle.
INSTALLING THE UNIT
The T3SU 300 can be used as a desktop stand-alone device or
mounted into a standard 19-inch equipment rack. See the section
Establishing Terminal Connection on page 2-6 for information on
terminal configuration.
Rackmount Installation
Follow these steps to mount your unit into a rack:
1. Install the 19-inch rackmount flanges on each side of the
T3SU 300 enclosure at one of the three available positions.
The ADTRAN T3SU 300 MIB is available in the support section of the
ADTRAN Web page at www.adtran.com.
Power to the T3SU 300 must be provided from a grounded 115 VAC,
60 Hz receptacle.
Be sure to install the flanges with the screws provided.