Filter
Top Products
Chapter 3. Configuration
3-14 T3SU 300 User Manual 61200217L1-1
modem). When set to PPP, SLIP, Dialup PPP, or Dialup SLIP, the
ethernet port is disabled. If you select any of the dialup options, an
additional menu item (
D
IALUP
O
PTIONS
) appears on the second
S
YSTEM
M
ANAGEMENT
C
ONFIGURATION
screen. See Figure 3-10. The
D
IALUP
O
PTIONS
are described on page 3-19.
Selections for
A
UXILIARY
P
ORT
M
ODE
include local and dialup
options for VT 100, PPP, and SLIP. If
M
ANAGEMENT
P
ORT
(see page
3-13) is set to
A
UX
P
ORT
, the
D
IALUP
O
PTIONS
are available.
Modem Mode
This selection applies to version 1200217L2 only. Select the
AUX
port function for your application. The
AUX
port, located on the
rear panel of the T3SU 300, provides a telephone line (POTS) for
connecting to the internal V.34 modem. The modem interface can
be configured for dial-in service in VT 100, SLIP, and PPP modes.
In addition, the T3SU 300 is capable of dial-out operation to report
error conditions. All modem options can be configured in the
D
IALUP
O
PTIONS
menu located on the second
S
YSTEM
M
ANAGEMENT
C
ONFIGURATION
screen. See Figure 3-9. The
D
IALUP
O
PTIONS
are
described on page 3-19.
Selections for the
M
ODEM
M
ODE
include dialup options for VT 100,
PPP, and SLIP. If the
M
ANAGEMENT
P
ORT
option (see page 3-13) is
set to
A
UX
P
ORT
, the
PPP
and
SLIP
options are available.
Auxiliary Port Baud Rate
Set the operating speed of the
AUX
port to match the connected
device. The selections are 1200, 2400, 4800, 9600, 19200, and
38400 bps.
Read Community Name
Enter the authentication strings used for SNMP management.
Match the T3SU 300 to the SNMP manager for read privileges.