Filter
Top Products
Chapter 3. Configuration
3-18 T3SU 300 User Manual 61200217L1-1
Table 3-5. DTE Port Trap Description
Toggle All Traps
When activated, this entry allows you to toggle ALL alarms
(previously described) between their disabled and enabled states.
Figure 3-9. System Management Configuration Menu (2 of 2)
Password
Set the password required at login (up to 32 characters). The default
password is adtran.
Trap Type If ENABLED, this trap is sent...
Port Status
Change
when the unit detects a change in any of the four
DTE ports. These traps may be generated when a
DTE interface card is plugged in, a cord is re-
moved, a port is reconfigured, a port goes into an
error condition due to cabling problems, or a port
goes into a test mode.