Filter
Top Products
Chapter 3. Configuration
3-4 T3SU 300 User Manual 61200217L1-1
DS3 Scrambler
Enable this option to scramble the DS3 payload data. This prevents
certain transport equipment from falsely reporting alarms.
Data Link
Set to
E
NABLE
to allow for remote configuration. When enabled, the
T3SU 300 provides a channel between the local and the remote DSU
for point-to-point remote configuration.
Remote Auto-Configuration
This feature allows one T3SU 300 (set to
M
ASTER
) to automatically
relay its DTE port bandwidth configuration to a second unit (set to
S
LAVE
). If desired, the feature can be disabled by either unit.
DTE PORTS
The
DTE P
ORTS
menu allows you to select a port to configure. If
R
EMOTE
A
CCESS
C
ONFIGURATION
is set to
M
ASTER
(
C
ONFIGURATION
->
DS3 N
ETWORK
->
R
EMOTE
A
UTO
C
ONFIGURATION
->
M
ASTER
),
then a fifth option,
T
IMED
P
ROFILES
, is available. See Figure 3-3. This
option allows you to set up timed profiles specifying bandwidth
allocation for all four ports.
Configuration selections for the individual ports are described in
the following section. A more in-depth description of
T
IMED
P
ROFILES
is on page 3-10.