Filter
Top Products
Chapter 3. Configuration
61200217L1-1 T3SU 300 User Manual 3-13
Gateway IP Address
Enter the gateway IP address of the T3SU 300. This address is
necessary only if the T3SU 300 and the network manager are
connected through a gateway node. If an IP packet is to be sent to a
different network, the unit sends it to the gateway.
Remote IP Address
Enter the remote T3SU 300’s IP address to provide network
management access through the local T3SU 300. See the section
Remote SNMP Management Application on page 7-7 for more
information.
IP Security
Enable or disable the IP Security option. If enabled, the unit accepts
management commands and TELNET sessions from the IP
addresses entered into the
IP H
OSTS
fields.
IP Hosts
Enter up to 16 IP addresses of management stations from which the
unit should accept management commands. These addresses are
only applicable if
IP S
ECURITY
is enabled.
Management Port
Assign the management port to be either LAN, FDL (facility
datalink), or the AUX Port.
Auxiliary Port Mode
This selection applies to version 1200217L1 only. Select the AUX
port’s function for your application. The AUX port, located on the
rear panel of the T3SU 300, can communicate through a VT 100
compatible terminal, or a device running SLIP or PPP protocol
(either through a direct connection or dialup through an external