Filter
Top Products
Chapter 2. Installation and Operation
61200217L1-1 T3SU 300 User Manual 2-7
2. Using the ADTRAN-provided terminal interface cable adapter,
connect the DTE port of a terminal to the 8-pin modular jack
labeled
Control
on the front panel of the T3SU 300.
3. Initialize the terminal session.
4. Press Enter repeatedly until the password prompt appears.
5. Enter the password. The factory default password is adtran.
The
M
AIN
menu appears. See Figure 2-3.
6. Make selections by entering the number corresponding to the
chosen parameter. Press ESC to return to the previous screen.
End a terminal session by selecting
L
OGOUT
from the
M
AIN
menu or by pressing Ctl-C at any time.
Figure 2-3. Terminal Main Menu
Navigating Within the Menus
Navigate within the T3SU 300 terminal menus using the following
procedures: