Filter
Top Products
Chapter 7. Applications
61200217L1-1 T3SU 300 User Manual 7-7
REMOTE SNMP MANAGEMENT APPLICATION
A remote T3SU 300 can be managed by a local management station
if the remote unit is assigned its own IP address. This address must
be assigned at both the near and far ends. Also, the
D
ATALINK
option must be enabled on both units.
In this application example (shown in Figure 7-4) a local T3SU 300,
connected to the same LAN as the management station, provides
management access to a remote T3SU 300. The local unit has the
remote unit’s IP address in its
R
EMOTE
IP A
DDRESS
field. That same
IP address is entered into the remote unit’s
L
OCAL
IP A
DDRESS
field. Table 7-4 gives an example configuration for this application.
Figure 7-4. Remote Management Application
T3
T3SU 300
T3SU 300
IN SERVICE
IN TEST
ALARM
LOS
NETWORK
IN SERVICE
IN TEST
ALARM
LOS
DTE PORT 1
IN SERVICE
IN TEST
ALARM
LOS
DTE PORT 2
IN SERVICE
IN TEST
ALARM
LOS
DTE PORT 3
IN SERVICE
IN TEST
ALARM
LOS
DTE PORT 4
REMOTE
ACTIVE
CONTROL
T3SU 300
IN SERVICE
IN TEST
ALARM
LOS
NETWORK
IN SERVICE
IN TEST
ALARM
LOS
DTE PORT 1
IN SERVICE
IN TEST
ALARM
LOS
DTE PORT 2
IN SERVICE
IN TEST
ALARM
LOS
DTE PORT 3
IN SERVICE
IN TEST
ALARM
LOS
DTE PORT 4
REMOTE
ACTIVE
CONTROL
T3SU 300
IP = 10.4.10.2
IP = 10.4.10.3
IP = 10.4.10.3