Filter
Top Products
74
PPC-120/140 User's Manual
7.1 Introduction
The PPC-120/140 has an on-board PCI flat panel/VGA interface. The
specifications and features are described as follows:
Chipset
The PPC-120/140 uses a C&T 65555 chipset for its PCI/SVGA controller.
It supports many popular LCD, EL, and gas plasma flat panel displays and
conventional analog CRT monitors. The 65555 VGA BIOS supports
monochrome LCD, EL, color TFT and STN LCD flat panel displays. In
addition, it also supports interlaced and non-interlaced analog monitors
(color and monochrome VGA) in high-resolution modes while
maintaining complete IBM VGA compatibility. Digital monitors
(i.e. MDA, CGA, and EGA) are NOT supported. Multiple frequency
(multisync) monitors are handled as if they were analog monitors.
Display memory
With on-board 2 MB display memory, the VGA controller can drive CRT
displays or color panel displays with resolutions up to 1024 x 768 at 64 K
colors. The display memory can be expanded to 4 MB for true-color
resolution of 1024 x 768.
Display types
CRT and panel displays can be used simultaneously. The PPC-120/140
can be set in one of three configurations: on a CRT, on a flat panel display,
or on both simultaneously. The system is initially set to simultaneous
display mode. The CD-ROM disc includes three *.COM files in the
subdirectory Utility\vga\ which can be used to configure the
display. In order to use these configuration programs, type the file name
and path at the DOS prompt.
CT.COM: Enables CRT display only
FP.COM: Enables panel display only
SM.COM: Enables both displays simultaneously