Filter
Top Products
Chapter 4 53
Front/Rear Panel
Front Panel
The REFLECTION Connector
The REFLECTION connector is a female 75 ohm type-N connector that connects
directly to the PORT 1 of the network analyzer using a semi-rigid cable that was
shipped with your test set.
CAUTION Check your analyzer's documentation for damage limits to the analyzer ports. Make
sure that your test setup will not cause those limits to be exceeded.
The TRANSMISSION Connector
The TRANSMISSION connector is a female 75 ohm type-N connector that
connects directly to the PORT 2 of the network analyzer using a semi-rigid cable
that was shipped with your test set.
CAUTION Check your analyzer's documentation for damage limits to the analyzer ports. Make
sure that your test setup will not cause those limits to be exceeded.
The Chassis Ground Connector
The chassis ground connector provides a convenient front panel ground connection
for a standard banana plug.
The PORT CONNECTION Status LEDs
The PORT CONNECTION status LEDs provide visual feedback of which test set
port(s) are connected to the REFLECTION and TRANSMISSION connectors of the
test set. When neither LED is lit for a particular test set port, the test set port is
terminated with the internal load.