Filter
Top Products
Chapter 6 79
SCPI Command Reference
:SENS{1-4}:CORR:MULT:SELF:ONCE
:SENS{1-4}:CORR:MULT:SELF:ONCE
Syntax :SENSe{[1]|2|3|4}:CORRection:MULTiport:SELF:ONCE
Description For channel 1 to channel 4, executes self calibration for the port pairs that are used
in the channel with the Test Set calibration.
NOTE If necessary test set calibration has not been executed, this command causes an
error. Also, if :SENS{1-4}:MULT on page 81 is off, this command causes an error.
Query response No query
Example of use
10 OUTPUT 717;":SENS1:CORR:MULT:SELF:ONCE"
Related commands :SENS{1-4}:MULT on page 81
:SENS{1-4}:MULT:PORT{1-2}:SEL on page 82
:SENS{1-4}:CORR:MULT:SELF on page 78
Equivalent key
[Cal] - Test Set Cal - Self Cal Once