Filter
Top Products
3
MPEGscope Plus and MPEGscope Lite
MPEGscope Plus and MPEGscope Lite
This section explains how to install the SMPTE 310M interface into the
MPEGscope Plus or Lite models. Normally, you will install the interface into slot 3,
the optional line interface slot. If you have a different MPEGscope PC than the
one illustrated below, you can still follow the procedure described in this section,
as the affected cards are installed in the same slot positions.
Note If your MPEGscope is housed in a Kayak XU PC and you also have another
optional interface (such as the ASI & Serial ECL (DHEI) interface), you can
rearrange the cards so that both the SMPTE 310M and the optional interface are
installed at the same time. This alternative configuration is shown on page 9.
slot 6—video card
slot 5—PCI LAN card
slot 4—MPEGscope main card
slot 3—optional line interface slot
slot 2—Real-time Analyzer card
slot 1—(empty)
MPEGscope Plus (E6277C)