Filter
Top Products
MPEGscope Plus and MPEGscope Lite
6
Step 2: Remove optional interface
Complete this step if your MPEGscope already has an optional interface installed
and you want to replace it with the SMPTE 310M interface. For an alternative
card configuration, refer to page 9.
1
Attach the antistatic wrist strap to your wrist and to the PC chassis as described in the
instructions on the envelope. Ensure that the copper foil end of this strap attaches to an
electrical ground.
2
Lay the computer on
its side so that you
can access the
cards from the top.
Back of computer
with connectors and
faceplates
IMPORTANT: