Filter
Top Products
MPEGscope Portable and Portable Lite
18
Step 4: Replace the cover
4
Reconnect your
display, power
cables, and LAN
connection, then
power on your
MPEGscope Portable.
3
Place the back cover in
position and replace the
six back panel screws.
1
Insert tabs on the sides of the
metal shield into the slots on
the outer frame, then replace
the two metal shield screws.
screw
#1
tabs
screw
#2
tabs
2
A plastic guide for the
MPEGscope main card is
located on the inside of the
metal shield (by the third
plastic guide screw). Use a
small screwdriver to push
down the plastic guide until the
edge of the MPEGscope main
card is engaged in the slot on
the guide.
screw
#6
screw
#5
screw
#4
screw
#2
screw
#1
screw
#3