Filter
Top Products
Raven and PinPoint CDMA User Guide Version 1.12
7. Check Selected Ports, then select the COM port the modem is connected to and
select Next.
8. Select Finish to exit the "Install New Modem" wizard.
9. You should see the modem added to the correct COM port.
10. To set the modem speed on the driver, highlight the modem driver and select
Properties.
11. Ensure the "Maximum Port Speed" is set to 115200, which is the default value of
the Raven CDMA.
12. Select OK to exit.
AirLink Communications, Inc. Page 14 March 24, 2004