Filter
Top Products
OmniSwitch 6624 OmniSwitch 6600 Series Chassis and Hardware Components
page 2-4 OmniSwitch 6600 Series Hardware Users Guide April 2004
OS6624 Specifications
Total number of 10/100 Mbps
ports per switch
24
Total number of Gigabit
Ethernet ports per switch
4 (for stand-alone switches); 2 (for stacked configurations)
Total number of 10/100 Mbps
ports per stack
192 (stack of eight switches)
Total number of Gigabit
Ethernet ports per stack
16 (stack of eight switches)
Fabric capacity 7.0 Gbps full duplex; 14 Gbps aggregate
Current draw Approximately 2.3 Amps
Power Approximately 55 Watts
Total available power supplies 2 (one factory-installed power supply and one optional back up power
supply)
Flash memory size 32 MB (30 MB usable)
RAM memory size 128 MB
Overall Width (rack-mount
flanges included)
19.125 inches
Chassis Width (rack-mount
flanges not included)
17.2 inches
Height 2.65 inches
Height (rack units) 1.5 RU
Chassis Depth 14 inches
Chassis Weight Approximately 12 lbs (13.5 lbs with optional back up power supply
installed)
Humidity Operating and storage relative humidity range from 10% to 95%
(non-condensing)
Altitude Sea level to 10,000 feet (3 km)
10/100 Ethernet Port Specifications
Connector type RJ-45
Standards supported IEEE 802.3u, IAB RFCs 826, 894
Data rate 10 or 100 Mbps (full or half duplex)
Maximum frame size 1518 Bytes; 1522 Bytes with IEEE 802.1Q tags
Connections supported 10BaseT hub or device; 100BaseTX hub or device
Cable supported 10BaseT: unshielded twisted-pair (UTP)
100BaseTX: unshielded twisted-pair (UTP), Category 5, EIA/TIA 568
or shielded twisted-pair (STP), Category 5, 100 ohm
Maximum cable distance 100 meters