Filter
Top Products
Rear Panel OmniSwitch 6600 Series Chassis and Hardware Components
page 2-12 OmniSwitch 6600 Series Hardware Users Guide April 2004
Rear Panel
The rear panel of OmniSwitch 6600 series switches contains the following major components:
• Factory-installed power supply
• Back up power supply bay for optional OS66BPS-100A power supply
• Connector for upcoming inline power supply (not currently supported)
• Grounding block for type LCD8-10A-L grounding lug
Note. OmniSwitch 6600 series switches offer the same rear panel components.
OmniSwitch 6600 Series Rear Panel
!
RR
CAUTION:
THIS UNIT MAY BE EQUIPPED
WITH TWO POWER CONNECTIONS. TO REDUCE
THE RISK OF ELECTRICAL SHOCK, DISCONNECT
BOTH POWER CONNECTIONS BEFORE
SERVICING UNIT.
ATTENTION:
CET APPAREIL COMPORTE
PLUS D'UN CORDON D'ALIMENTATION. AFIN DE
PREVENIR LES CHOCS ELECTRIQUES, DEBRANCHE
LES DEUX CORDONS D'ALIMENTATION AVANTE DE
FAIRE LA REPARATION.
LAN PWR PORT
50/60 Hz, 2/2/1 A
MODEL NO: OS-6648
100/115/230 V
RATING: 100-240V 50-60Hz, 1.02A
THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES. OPERATION
IS SUBJECT TO THE FOLLOWING TWO CONDITIONS:
(1) THIS DEVICE MAY NOT CAUSE HARMFUL INTERFERENCE, AND
(2) THIS DEVICE MUST ACCEPT ANY INTERFERENCE RECEIVED, INCLUDING
INTERFERENCE THAT MAY CAUSE UNDESIRED OPERATION.
THIS CLASS A DIGITAL APPARATUS MEETS ALL REQUIREMENTS OF THE
CANADIAN INTERFERENCE-CAUSING EQUIPMENT REGULATIONS.
CET APPAREIL NUMÉRIQUE DE LA CLASSE A RESPECTE TOUTS LES
EXIGENCES DU REGLEMENT SUR LE MATÉRIEL BROUILLEUR DU CANADA.
TUV
Rheinland
ProductSafety
geprufte
Sicherheit
Assembled in the US of US and Non-US Components
U.S. PATENT NO. 5,394,402
LISTED
I.T.E.
5Z71
E164613C
Inline Power Connector
Not currently supported.
Reserved for future use
with upcoming inline
power supply.
Redundant Power Supply Bay
Slot for optional user-installable OS66BPS-100A back up
power supply. For more information on the back up power
supply, including technical specifications and installation
instructions, refer to “Back Up Power Supply” on page 2-18.
Power Switch
indicates on position;
indicates off position.
Power Connector Socket
Type IEC-320-C13. Supports
one 10 amp power cord.
It is recommended that you use
only Alcatel-provided power
cords.
Product, Safety, and Compliance Information
Refer to the “Regulatory Compliance and Safety
Information” chapter for detailed information.
Ground Lug Connection
Unpainted area for Type
LCD copper lug attach-
ment. Refer to page 2-17
for more information.