Filter
Top Products
OmniSwitch 6600 Series Chassis and Hardware Components OmniSwitch 6600-U24
OmniSwitch 6600 Series Hardware Users Guide April 2004 page 2-5
OmniSwitch 6600-U24
The OS6600-U24 is a stackable edge/workgroup switch offering 24 fiber 100 Mbps Ethernet SFP ports.
The OS6600-U24 can also be equipped with up to four Gigabit Ethernet ports for connections to a high
speed backbone or server.
The front panel of the OS6600-U24 chassis contains the following major components:
• Console (RJ-45) port
• Stack indicator LED
• 24 fiber 100 Ethernet SFP ports
• One slot for OS6600-GNI-U2 (fiber) or OS6600-GNI-C2 (copper) Gigabit Ethernet uplink module
• One slot for Gigabit Ethernet uplink module as described above or stacking module
The following SFP transceivers are available for the OS6600-U24:
• SFP-100-LC-MM—100Base FX multimode 62.5/125 and 50/125 micron fiber, supports distances up
to 2 km; uses LC connectors.
• SFP-100-LC-SM15—100Base FX single mode 9/125 micron fiber, supports distances up to 15 km;
uses LC connectors.
• SFP-100-LC-SM40—100Base FX single mode 9/125 micron fiber, supports distances up to 40 km;
uses LC connectors.
• SFP-100-MTRJ-MM—100Base FX multimode 62.5/125 and 50/125 micron fiber, supports distances
up to 2 km; uses MTRJ connectors.
Note. See “Installing SFPs (OS6600-U24)” on page 2-40 for information on installing SFP transceivers.
Refer to the illustration on the following page for more front panel information. For detailed LED descrip-
tions, refer to page 2-11. For information on the chassis rear panel, refer to page 2-12.