Filter
Top Products
www.aleratec.com
32
Using the HDD PortaCruiser
Duplicator Mode
Advanced Setup Menu: 8-02 Read Error Skip
This function can be enabled to ignore any error that occurs during copying. By
default, the HDD PortaCruiser will halt the copy operation when it encounters
an unreadable area of the source hard disk and display an error. Enabling this
option will ignore any bad sectors on the source hard drive by skipping over
them.
Warning: Setting this function to “On” may result in corrupt data on copied hard
drives.
Press and hold 1. ESC for about 3 seconds to access the “Adv Setup” menu.
The following screen will be displayed.
Use the arrow buttons (2. or) to scroll to “Read Error Skip”. The
following screen will be displayed.
Press 3. ENT to display the current conguration setting. The default setting
is “Off”.
Press the arrow buttons (4. or) to toggle the option “On” or “Off”. After
changing a setting, remember to press ENT to save it.
ENT
8. Adv Setup
ESC
RESET
MUTE
ENT
8-02. Adv Setup
Read Error Skip
ESC
RESET
MUTE
ENT
Read Error Skip
Off
ESC
RESET
MUTE