Filter
Top Products
www.aleratec.com
38
Using the HDD PortaCruiser
Duplicator Mode
Advanced Setup Menu: 8-08 Copy HPA
If the source hard disk contains a Host Protected Area (HPA), this option allows
you to choose whether or not to copy data within the HPA.
Press and hold 1. ESC for about three seconds to access the “Adv Setup”
menu. The following screen will be displayed.
Use the arrow buttons (2. or) to select “Copy HPA”. The following
information will be displayed.
Press 3. ENT to display the current conguration setting. A screen similar to
the following will be displayed.
Use the arrow buttons (4. ) to toggle the option “On” or “Off”. After
changing a setting, remember to press ENT to save it.
Note: The HPA is a hidden data region defined in ATA/ATAPI-4. This area is
not usually accessible to the operating system or software applications. The
HDD PortaCruiser supports the copying of data from this hidden area.
ENT
8. Adv Setup
ESC
RESET
MUTE
ENT
8-08. Adv Setup
Copy HPA
ESC
RESET
MUTE
ENT
Copy HPA
Off
ESC
RESET
MUTE