Filter
Top Products
www.aleratec.com
37
Using the HDD PortaCruiser
Duplicator Mode
Advanced Setup Menu: 8-07 USB Auto-Link
This function sets the HDD PortaCruiser to immediately enter Dual Disk RAID
Controller (USB) mode on startup. This allows direct control of the unit
from a
PC.
Press and hold 1. ESC for about three seconds to access the “Adv Setup”
menu. The following screen will be displayed.
Use the arrow buttons (2. or) to select “USB Auto-Link”. The following
screen will be displayed.
Press 3. ENT to display the available options. The default is “OFF”.
Use the arrow buttons (4. ) to toggle the option “ON” or “OFF”. If
set to “ON” the unit will immediately enter USB mode on startup. After
changing a setting, remember to press ENT to save it.
ENT
8. Adv Setup
ESC
RESET
MUTE
ENT
8-07. Adv Setup
USB Auto-Link
ESC
RESET
MUTE
ENT
USB Auto-Link
OFF
ESC
RESET
MUTE
ENT
USB L.H Mode
D1:HDD D2:HDD
ESC
RESET
MUTE