Filter
Top Products
AT-WCU200G User’s Guide
13
.
Figure 15 Allied Telesyn Wireless Client Manager, Status Tab
For information about how to use the Allied Telesyn AT-WCU200G
Client Manager to configure the wireless adapter, see the following
sections.
❑ One-Button Quick Connection on page 13
❑ Configuring the Wireless Client Manager Settings on page 16
One-Button
Quick
Connection
You can connect the AT-WCU200G wireless adapter on your computer
to another device by selecting a button from the Allied Telesyn AT-
WCU200G Wireless Client Manager window. See Figure 15 on page 13.
The PC->AP button allows you to connect to an access point or wireless
router in the infrastructure mode. The PC->PC button allows you to
connect to another USB adapter equipped computer in the Ad-hoc
mode.
In addition, this section provides a procedure on how to reconnect to
the Allied Telesyn Wireless Client Manager.
See the following procedures:
❑ Connecting to an Access Point on page 14
❑ Connecting to a PC on page 14
❑ Reconnecting the AT-WCU200G Wireless Adapter on page 15