Filter
Top Products
AT-WCU200G User’s Guide
21
Deleting a Network Profile
To delete a profile, perform the following procedure from the Site Survey
screen:
1. Click on a profile from the Profile Name area.
Note
You cannot delete the active profile.
2. Click Delete.
Configuring the
Profile Edit
Screen
The Profile Edit screen allows you to create and edit network profiles.
This screen contains the following tabs:
❑ General
❑ Encryption
❑ Advanced
Note
If you want to modify the network profile settings and you are
unsure of the information, consult your MIS staff.
Configuring General Information
The General Tab on the Profile Edit page allows you to assign a profile
name and SSID. It also displays the network type, channel, and
transmission rate.
The Profile Edit screen is displayed in Figure 17 on page 20. The General
Tab is selected automatically. To display the Profile Edit screen, see
Configuring Network Profiles
on page 18.
1. Configure the following fields in the General Tab as needed:
❑ Profile name: Indicates the network settings currently in use.
❑ SSID: Indicates the name assigned to the wireless network.
❑ Network Type: Click on the pull down menu. Displays the mode
in current use, either 802.11 Infrastructure mode or Ad-hoc mode.
❑ Channel: Indicates which channel is currently in use. The default
setting is 6. In Ad-hoc mode, you must set both PCs to the same
channel. The wireless adapter selects the channel to match the
channel setting on the selected access point automatically.