Filter
Top Products
AT-WCU200G User’s Guide
27
to Send) value. The default setting is 2347 (when the Power
Consumption field is set to disable). Through the proper use of
the RTS/CTS Threshold setting, you can fine tune the operation of
your wireless LAN. If you find a relatively large number of
collisions, you can enable RTS/CTS by setting a specific packet size
threshold of 0 to 2347 bytes. If the packet that the access point is
transmitting is larger than the threshold, it initiates the RTS/CTS
function. If you do not have any hidden nodes, then the use of
RTS/CTS only increases the amount of overhead which reduces
throughput.