Filter
Top Products
12 Software Release Note AlliedWare Plus Version 5.4.3-0.1 C613-10508-01-REV B
ipv6 address
dhcp
New Y Y Y Y Y DHCP for IPv6
(DHCPv6)
Commands
Use this command to activate the DHCPv6
client on the interface that you are
configuring. This allows the interface to use
the DHCPv6 client to obtain its IPv6
configuration details from a DHCPv6 server
on its connected network.
ipv6 dhcp
client pd
New Y Y Y Y Y DHCP for IPv6
(DHCPv6)
Commands
Use this command in Interface Configuration
mode to enable the DHCPv6 client process
and enable requests for prefix delegation
through the interface that you are
configuring.
ipv6 dhcp
option
New Y Y Y Y Y DHCP for IPv6
(DHCPv6)
Commands
Use this command to create a user-defined
DHCPv6 option. You can then use this option
when configuring a DHCPv6 server address
pool, by using the option command.
ipv6 dhcp pool New Y Y Y Y Y DHCP for IPv6
(DHCPv6)
Commands
Use this command to enter the configuration
mode for the DHCPv6 server pool name
specified. If the name specified is not
associated with an existing pool, the switch
will create a new pool with this name, then
enter the configuration mode for the new
pool.
ipv6 dhcp
server
New Y Y Y Y Y DHCP for IPv6
(DHCPv6)
Commands
Use this command in Interface Configuration
mode to enable DHCPv6 server for the
current IPv6 configured interface to use the
specified DHCPv6 server pool name.
ipv6 local pool New Y Y Y Y Y DHCP for IPv6
(DHCPv6)
Commands
Use this command in Global Configuration
mode to configure a local DHCPv6 server
prefix delegation pool specifying a pool name
and a prefix/prefix length. You can optionally
exclude the locally assigned prefix from the
pool with the exclude-local-prefix keyword.
ipv6 nd prefix New Y Y Y Y Y DHCP for IPv6
(DHCPv6)
Commands
Use this command in Interface Configuration
mode for a VLAN interface to specify IPv6
prefix information generated from the
DHCPv6 Server for DHCPv6 Prefix-Delegation.
link-address New Y Y Y Y Y DHCP for IPv6
(DHCPv6)
Commands
Use this command in DHCPv6 Configuration
mode to specify a link-address prefix on
a DHCPv6 request packet from an incoming
interface for DHCPv6 server pool
configuration.
option New Y Y Y Y Y DHCP for IPv6
(DHCPv6)
Commands
Use this command to add a user-defined
option to the DHCPv6 prefix pool you are
configuring. For the hex, integer, and flag
option types, if the option already exists, the
new option overwrites the existing option’s
value.
prefix-
delegation
pool
New Y Y Y Y Y DHCP for IPv6
(DHCPv6)
Commands
Use this command to add a DHCPv6 server
prefix-delegation pool entry to the current
DHCPv6 pool configuration. You must define
a DHCPv6 server prefix-delegation pool using
the ipv6 dhcp pool command before
using this command.
show counter
ipv6 dhcp-
client
New Y Y Y Y Y DHCP for IPv6
(DHCPv6)
Commands
Use this command to show the DHCPv6 client
counter information. See the related
show
counter ipv6 dhcp-server command
for DHCPv6 server information.
Table 4: New and modified commands in 5.4.3
Command Status
x510
x610
x900
x908
x8112
Software
Reference
Chapter Description