Filter
Top Products
C613-10508-01-REV B Software Release Note AlliedWare Plus Version 5.4.3-0.1 5
SwitchBlade x8112 key features
■ Dual CFCs are partnered with 10 line card slots
■ 80Gbps non-blocking throughput to each line card slot
■ Active-Active switching fabric utilizes all available system bandwidth, and fast failover
is provided with the second control card in hot-standby.
■ Supports IEEE 802.3at PoE+ (30W): two additional PoE PSUs can be installed to
maximize power available to connected devices
■ Designed to reduce power consumption (high efficiency power supplies and low
power chip sets) and minimize hazardous waste
■ An ECO-Switch button on the front panel allows conservation of additional power by
turning off all diagnostic LED indicators when they are not required
For information about the AlliedWare Plus features on SwitchBlade x8112, see the
AlliedWare Plus Software Reference for SwitchBlade x8100 Series Switches.
SwitchBlade x8112 Controller Fabric Card (CFC)
■ SBx81CFC400 controller fabric card provides 40Gbps bandwidth per line card slot
(80 Gbps with 2 control cards)
■ 80Gbps x 10 line card slots = 800Gbps per system
■ RS-232 and Ethernet management port for out of band management
■ USB connector for external file transfer and storage
■ Centralised LEDs provide status of all 12 card slots, CFC, PSU, fan tray
SwitchBlade x8112 Line Cards
■ SBx81GT24 Line Card with 24 x 10/100/1000T ports
■ SBx81GP24 Line Card with 24 x 10/100/1000T PoE+ ports
■ SBx81GS24a Line Card with 24 x 100/1000 SFP ports
■ SBx81XS6 Line Card with 6 x 10Gbps SFP+ ports
PSUs and Fan Tray
The switch uses high efficiency power supplies. Each power supply can be fed from a
separate power source to increase reliability.
■ SBxPWRSYS1 (1200W AC System Power Supply)
The switch operates with one system PSU, and installing a second loadsharing PSU
provides ultimate redundancy.
■ SBxPWRPOE1 (1200W AC PoE Power Supply)
Two PoE PSUs can be installed to maximize power available to connected devices.
■ SBxFAN12 (Fan tray for 12 slot chassis)
The PSUs and the fan tray are all hot-swappable to maximise uptime during
maintenance or reconfiguration.
For more information about the hardware, see the SwitchBlade x8112 Installation Guide.
These documents are available from our website at www.alliedtelesis.com/switches/
sbx8112.