Filter
Top Products
C613-10508-01-REV B Software Release Note AlliedWare Plus Version 5.4.3-0.1 13
show counter
ipv6 dhcp-
server
New Y Y Y Y Y DHCP for IPv6
(DHCPv6)
Commands
Use this command to show the DHCPv6
server counter information. See the related
show counter ipv6 dhcp-client
command for DHCPv6 client information.
show ipv6
dhcp
New Y Y Y Y Y DHCP for IPv6
(DHCPv6)
Commands
Use this command to show the DHCPv6
unique identifier (DUID) configured on your
switch. This command uses the DUID based
on the link-layer address for both DHCPv6
client and DHCPv6 server identifiers. The
switch uses the MAC address from the lowest
interface number for the DUID.
show ipv6
dhcp binding
New Y Y Y Y Y DHCP for IPv6
(DHCPv6)
Commands
Use this command to show the address
entries that the DHCPv6 server leases to
DHCPv6 clients. Note that applying this
command with the optional summary
keyword parameter displays the number of
addresses per pool, but not the address or
prefix entries per pool.
show ipv6
dhcp interface
New Y Y Y Y Y DHCP for IPv6
(DHCPv6)
Commands
Use this command in User Exec or Privileged
Exec mode to display DHCPv6 information for
a specified interface, or all interfaces when
entered without the interface parameter.
show ipv6
dhcp pool
New Y Y Y Y Y DHCP for IPv6
(DHCPv6)
Commands
Use this command to display the
configuration details and system usage of the
DHCPv6 address pools configured on the
switch.
sntp-address New Y Y Y Y Y DHCP for IPv6
(DHCPv6)
Commands
Use this command to add an SNTP Server
IPv6 address to a DHCPv6 Server pool.
show counter
dhcp-server
Modified Y N Y Y Y Dynamic Host
Configuration
Protocol
(DHCP)
Commands
Use this command to show counters for the
DHCP server on your device. This command is
now available from both the User Exec and
the Privileged Exec mode. Also note that
counters for DHCP Lease Query messages
from the DHCP Server to DHCP Relay Agents
are no longer shown.
copy (local) Deleted Y Y Y Y Y File
Management
Commands
The copy (local) command has been
removed.
copy (URL) New Y Y Y Y Y File
Management
Commands
Use this command to specify the source of a
file to copy.
dir Modified Y Y Y Y Y File
Management
Commands
This command has been modified with the
addition of the sort and card parameters.
arp-mac-
disparity
Modified Y Y Y Y Y IP Addressing
and Protocol
Commands
Use this command to enable the reception of
ARP (Address Resolution Protocol) packets
that contain a multicast MAC address in the
sender field. By default, ARP packets that
contain a multicast MAC address in the
sender field are dropped. The no variant of
this command reverts to the default behavior.
clear arp-cach Modified Y Y Y Y Y IP Addressing
and Protocol
Commands
You can now optionally specify the IPv4
address, including the IPv4 address for a VRF
instance, of an ARP entry to be cleared from
the ARP cache.
Table 4: New and modified commands in 5.4.3
Command Status
x510
x610
x900
x908
x8112
Software
Reference
Chapter Description