Filter
Top Products
16 Software Release Note AlliedWare Plus Version 5.4.3-0.1 C613-10508-01-REV B
show ip ospf
database
Modified N Y Y Y Y OSPF
Commands
Use this command to display a database
summary for OSPF information. Added
self-originate, max-age, and adv-
router parameters to the specifying of
which LSAs to display.
show ip ospf
database
external
Modified N Y Y Y Y OSPF
Commands
Use this command to display information
about the external LSAs. Added self-
originate and adv-router parameters
to the specifying of which LSAs to display.
show ip ospf
database
network
Modified N Y Y Y Y OSPF
Commands
Use this command to display information
about the network LSAs. Added self-
originate and adv-router parameters
to the specifying of which LSAs to display.
show ip ospf
database
router
Modified N Y Y Y Y OSPF
Commands
Use this command to display information
about the router LSAs. Added self-
originate and adv-router parameters
to the specifying of which LSAs to display.
area
authentication
ipsec spi
New N Y Y Y Y OSPFv3 for
IPv6
Commands
Use this command in Router Configuration
mode to enable; MD5 (Message-Digest 5),
SHA1 (Secure Hash Algorithm 1), AES-CBC
(Advanced Encryption Standard-Cipher Block
Chaining) and 3DES (Triple Data Encryption
Standard) ESP (Encapsulating Security
Payload) encryption authentication for a
specified OSPF area.
area virtual-
link
authentication
ipsec spi
New N Y Y Y Y OSPFv3 for
IPv6
Commands
Use this command in Router Configuration
mode to enable authentication for virtual
links in a specified OSPF area.
area virtual-
link encryption
ipsec spi
New N Y Y Y Y OSPFv3 for
IPv6
Commands
Use this command in Router Configuration
mode to enable either AES-CBC (Advanced
Encryption Standard-Cipher Block Chaining)
or 3DES (Triple Data Encryption Standard) ESP
(Encapsulating Security Payload) encryption
for virtual links in a specified OSPF area.
distance Modified N Y Y Y Y OSPFv3 for
IPv6
Commands
Use this command to set the administrative
distance for OSPFv3 routes.
distribute-list New N Y Y Y Y OSPFv3 for
IPv6
Commands
Use this command in the Router
Configuration mode to filter incoming or
outgoing OSPFv3 route updates from the
networks as defined in an associated access-
list. The no variant of this command disables
this feature for networks as defined in an
access-list.
ipv6 ospf
authentication
spi
New N Y Y Y Y OSPFv3 for
IPv6
Commands
Use this command in Interface Configuration
mode to enable either MD5 (Message-Digest
5) or SHA1 (Secure Hash Algorithm 1)
authentication for a specified interface.
ipv6 ospf
encryption spi
esp
New N Y Y Y Y OSPFv3 for
IPv6
Commands
Use this command in Interface Configuration
mode to enable either AES-CBC (Advanced
Encryption Standard-Cipher Block Chaining)
or 3DES (Triple Data Encryption Standard) ESP
(Encapsulating Security Payload) encryption
for a specified interface.
Table 4: New and modified commands in 5.4.3
Command Status
x510
x610
x900
x908
x8112
Software
Reference
Chapter Description