Filter
Top Products
MULTITASKER
400-0367-005 17
CARD CONTROL
Card control commands allow the main functions of
the card to be executed over the RS-232 bus, or
from the front panel’s programmable keys.
20. [ONmm]
This command turns on a single output.
Command Format: [ONmmCn]
mm = Output Number (mm = # from 01 to 64)
Cn = Card ID (n = slot # from 1 to max slots)
Example:
There is an MT107-103 in slot 8. Turn on output
number 64 by sending [ON64C8].
21. [ON]
This command turns on all outputs.
Command Format: [ONCn]
Cn = Card ID (n = slot # from 1 to max slots)
Example:
There is an MT107-103 in slot 8. Turn on all
outputs by sending the command [ONC8].
22. [OFFmm]
This command turns off a single output.
Command Format: [OFFmmCn]
mm = Output Number (mm = # from 01 to 64)
Cn = Card ID (n = slot # from 1 to max slots)
Example:
There is an MT107-103 in slot 8. Turn off only
Output 1 by sending [OFF1C8].
23. [OFF]
This command turns off all outputs.
Command Format: [OFFCn]
Cn = Card ID (n = slot # from 1 to max slots)
Example:
There is an MT107-103 in slot 8. Turn off all
outputs by sending [OFFC8].
24. [ImmOxx]
This command connects a single input to a
single output.
Command Format: [ImmOxxCn]
mm = Input (2-digit # from 01 to 64)
xx = Output (2-digit # from 01 to 64)
Cn = Card ID (n = slot # from 1 to max slots)
Example:
Connect Input 22 to Output 32 of C8 by sending
[I22O32C5].
25. [ImmO*]
This command connects a single input to all the
outputs.
Command Format: [ImmO*Cn]
mm = Input (2-digit # from 01 to 64)
Cn = Card ID (n = slot # from 1 to max slots)
Example:
Connect Input 7 of C8 to all the outputs of C8 by
sending [I07O*C8].
26. [INmmS]
This command displays a list of all enabled
outputs that are connected to the specified
input. Disabled outputs are not listed.
Command Format: [INmmSCn]
mm = Input Number (mm = # from 01 to 64)
Cn = Card ID (n = slot # from 1 to max slots)
Example 1:
There is an MT107-103 in slot 8. Input 1 is
connected to all outputs, but only Outputs 1-4
are enabled. Send the command [IN01SC8] and
receive the following feedback:
[1,2,3,4C08]