AmbiCom WL250-KIT Network Router User Manual


 
2-5 Setup Internet Connection (WAN Setup)
Internet connections setup can be done by using ‘Quick Setup’ menu described in chapter 2-3. However, you can setup WAN
connections up by using WAN configuration menu. You can also set advanced functions like DDNS (Dynamic DNS) here.
Please click ‘WAN’ menu on the left of web management interface, and the following message will be displayed on your web
browser:
Please select an Internet connection method depend on the type of connection you’re using. You can either click the
connection method on the left (1) or right (2). If you select the connection method on the right, please click ‘More Configuration’
button after a method is selected.
1
2
Dynamic IP - Please go to section 2-5-1
Static IP - Please go to section 2-5-2
PPPoE - Please go to section 2-5-3
PPTP - Please go to section 2-5-4
L2TP - Please go to section 2-5-5
Telstra Big Pond - Please go to section 2-5-6
DNS - Please go to section 2-5-7
DDNS - Please go to section 2-5-8
21