AmbiCom WL250-KIT Network Router User Manual


 
2-7 Wireless LAN Configurations
2-7-1 Basic Wireless Settings
2-7-1-1 Setup Procedures For ‘AP'
2-7-1-2 Setup Procedures For ‘Station-Infrastructure'
2-7-1-3 Setup Procedures For ‘AP Bridge - Point to Point’
2-7-1-4 Setup Procedures For ‘AP Bridge - Point to Multi Point’
2-7-1-5 Setup Procedures For ‘AP Bridge - WDS’
2-7-1-6 Setup Procedures For ‘Universal Repeater'
2-7-2 Advanced Wireless Settings
2-7-3 Wireless Security
2-7-3-1 Disable Wireless Security
2-7-3-2 WEP - Wired Equivalent Privacy
2-7-3-3 Wi-Fi Protected Access (WPA)
2-7-3-4 WPA RADIUS
2-7-4 Wireless Access Control
2-7-5 Wi-Fi Protected Setup (WPS)
2-7-6 Security Tips For Wireless Network
CHAPTER III: ADVANCED FUNCTIONS
3-1 Quality OF Service (QoS)
3-1-1 Basic QoS Settings
3-1-2 Add A New QoS rule
3-2 Network Address Translation (NAT)
3-2-1 Basic NAT Settings (Enable or disable NAT function)
3-2-2 Port Forwarding
3-2-3 Virtual Server
3-2-4 Port Mapping For Special Applications
3-2-5 UPnP Setting
3-2-6 ALG Settings
3-3 Firewall
3-3-1 Access Control
3-3-1-1 Add PC
3-3-2 URL Blocking
3-3-3 DoS Attack Prevention
3-3-3-1 DoS - Advanced Settings
3-3-4 Demilitarized Zone (DMZ)
3-4 System Status
3-4-1 System Information And Firmware Version
3-4-2 Internet Connection Status
3-4-3 Device Status
3-4-4 System Log