AmbiCom WL250-KIT Network Router User Manual


 
3-2-5 UPnP Setting
This function enables network auto-configuration for peer-to-peer communications, with this function, network devices will be
able to communicate with other devices directly, and learn about information about other devices. Many network device and
applications rely on UPnP function nowadays.
Please click ‘NAT’ menu on the left of web management interface, then click ‘UPnP’, and the following message will be
displayed on your web browser:
After you finish all settings, please click ‘Apply’ button on the bottom of this page. After you click ‘Apply’, the following
message will be displayed on your web browser:
Please wait for about 30 seconds, then click ‘OK!’ button. You’ll be back to router management interface again, and the router
is ready with new settings.
56