AmbiCom WL250-KIT Network Router User Manual


 
3-2-6 ALG Settings
Application Layer Gateway (ALG) is a special function of this router. It includes many preset routing rules for numerous
applications which require special support. With these supports, those applications which required special support will be able
to work with NAT architecture.
Please click ‘NAT’ menu on the left of web management interface, then click ‘ALG Settings’, and the following message will be
displayed on your web browser:
After you finish all settings, please click ‘Apply’ button on the bottom of this page. After you click ‘Apply’, the following
message will be displayed on your web browser:
Please wait for about 30 seconds, then click ‘OK!’ button. You’ll be back to router management interface again, and the router
is ready with new settings.
57