Filter
Top Products
Notice Page
NOTICE
No part of this document may be reproduced, transmitted, transcribed, stored in a retrieval system, or
translated into any language or computer language, in any form or by any means, electronic, mechanical,
magnetic, optical, chemical, manual, or otherwise, without the prior written permission of Ampro
Computers, Incorporated.
DISCLAIMER
Ampro Computers, Incorporated makes no representations or warranties with respect to the contents of this
manual or of the associated Ampro products, and specifically disclaims any implied warranties of
merchantability or fitness for any particular purpose. Ampro shall under no circumstances be liable for
incidental or consequential damages or related expenses resulting from the use of this product, even if it has
been notified of the possibility of such damages. Ampro reserves the right to revise this publication from
time to time without obligation to notify any person of such revisions. If errors are found, please contact
Ampro at the address listed below on the Notice page of this document.
Audience
This manual provides reference only for computer design engineers, including but not limited to hardware
and software designers and applications engineers. Ampro Computers, Inc. assumes you are qualified to
design and implement prototype computer equipment.
ii Reference Manual MightyBoard 821
TRADEMARKS
Ampro and the Ampro logo are registered trademarks, and CoreModule, Little Board, LittleBoard,
MightyBoard, MightySystem, MiniModule, ReadyBoard, ReadyBox, ReadyPanel, ReadySystem,
RuffSystem are trademarks of Ampro Computers, Inc. All other marks are the property of their respective
companies.
REVISION HISTORY
Ampro Computers, Incorporated
5215 Hellyer Avenue
San Jose, CA 95138-1007
Tel. 408 360-0200
Fax 408 360-0222
www.ampro.com
© Copyright 2007, 2008 Ampro Computers, Incorporated
Revision Reason for Change Date
A, A Initial Release Dec/06
A, B Correction to move pin 1 on J21 Feb/07
A, C Removed reference to Design Library in
Mechanical Specifications
Dec/07
B, A Removed TV-Out; added LAN LED
jumper pins; corrected block diagram;
added reference to Design Library back
into Mechanical Specification
Aug/08