AMT Datasouth 4000 Printer User Manual


 
User's Guide 1
IMPORTANT SAFETY INSTRUCTIONS
AND OTHER NOTICES
n This label printer complies with the requirements in Part 15 of FCC rules for a Class A
computing device. Operation of this equipment in a residential area may cause
unacceptable interface to radio and TV reception, requiring the operator to take whatever
steps are necessary to correct the interference.
n Place the printer on a flat, firm and solid surface.
n Do not place the printer near a heat source or near water.
n Refer to the specification label on the bottom of this printer and ensure that your power
source exactly meets these requirements.
n Do not open the printer during operation to avoid electrical shock.
n Do not attempt to disassemble this printer if it malfunctions.
n All rights are reserved. No part of this document may be reproduced or issued to third
parties in any form without the permission of AMT Datasouth.
n The material in this document is provided for general information and is subject to change
without notice.
TRADEMARK CREDITS
PCL is a registered trademark of Hewlett-Packard Company
Windows, MS-Word and MS-DOS are registered trademarks of Microsoft Corporation
PC is a registered trademark of International Business Machines
Centronics is a registered trademark of Centronics Corporation
CodeSoft is a registered trademark of Techniques Avancees
BarTender is a registered trademark of Seagull Scientific Systems, Inc.
LabelView is a registered trademark of Techniques Avancees
LabelMatrix is a registered trademark of StrandWare, Inc