Filter
Top Products
36 User's Guide
Pressed during normal operation
Button Function
m FEED The printer will Feed a one label.
m PAUSE The printer will begin blinking the READY LED.
If printing the printer will STOP printing, and the READY
LED will blink.
If pressed a second time the printer will resume normal
operation.
The FM4602/4603 models will blink the READY LED and
display PAUSE on the LCD display while in the Paused
condition.
m CANCEL The printer will Stop printing and delete any further
information in the printer's buffer. The user must realign the
media by pressing the FEED button, following this function.
The FM4602/4603 models will blink the READY LED and
display CANCEL on the LCD display while in the Paused
condition.
Pressed for Special functions
The following functions are only available on the FM4602 and FM 4603 models.
Button Function
m PAUSE
m CANCEL
Enter into the printer's Setup menu.
See the Front Panel Setup Menu section for more
information.
m PAUSE
m CANCEL
If held down for more than 5 seconds, the printer will allow
Language Selection.
See the Setting the Display Language section for more
information.
Note: Both buttons must be pressed at the same time for the above special functions.