Filter
Top Products
46 User's Guide
Back Panel Switches (FM4602 and FM4603 models only)
Back Panel Switches are only available on FM4602 and FM4603.
Any change in switch position is not registered until Power is cycled.
Standard Switch Settings
Switch
Number
Function Position
setting
Description
ON Ribbon is installed. Thermal transfer mode. Enables
end-of-ribbon detection. If end-of-ribbon occurs the
RIBBON and READY indicators will blink.
1 Thermal
Transfer
Ribbon
OFF Ribbon is not installed. Direct thermal.
ON PPLA: Alternate (printable) control code set.
PPLB: Euro dollar symbol is used to replace the
character ‘_’.
2 Euro Mark
OFF PPLA: Standard control set.
PPLB: No Euro symbol.
ON Cutter is installed.3 Cutter
OFF Cutter is not installed.
ON The gap length is more than 4 mm.4 Gap Size
OFF Media with normal gap or continuous media.
ON Peeler is installed.5
OFF Peeler is not installed.