Filter
Top Products
Appendix C: Troubleshooting
94
RE-DM4 and RE-DM6 RADIA Eclipse Dimmer Modules
Testing AMX Lighting features
In general, any SEND_STRING valid for the Radia can be used in PASS mode. The ones below are a
useful subset.
Testing procedures for AMX Lighting features
To test this Type this, then press
Enter
Result
Communications 1 Status of AMX Lighting channel 1
Curves
AC Status of All Curves
AZ Status of All Levels
AL100 All levels = 100%
AL0 All levels = 0
Channels
1L50T9 AMX Lighting channel 1 = 50%
2L50T9 AMX Lighting channel 2 = 50%
3L50T9 AMX Lighting channel 3 = 50%
4L50T9 AMX Lighting channel 4 = 50%
5L50T9 AMX Lighting channel 5 = 50%
6L50T9 AMX Lighting channel 6 = 50%
Low End Setting
LE? Pack Status of Low End Trim
Ramping Up
AL100T20 Ramp all up in 20 sec.
Ramping Down
AL0T20 Ramp all down in 20 sec.
Phase Status
Y Y-OK or Y-FAIL status is returned