Filter
Top Products
Installation
27
RE-DM4 and RE-DM6 RADIA Eclipse Dimmer Modules
FIG. 26 shows an example of how to interconnect two AMX Lighting RE-DM4 controllers and a
AXLink wall panel.
Configuring and connecting AXLink
On all AMX Lighting controllers, DIP switch SW1 sets the AXLink device number. The device number
is determined by the value of all the switch position settings. The following table shows the SW1 DIP
switch positions and their values. The device number assignment range is 1 through 255.
FIG. 26 AXLink configuration sample
SW1 DIP switch setting values for AXLink
Position Value
11
22
34
48
516
632
764
8 128
AXLink
Neutral Neutral
HOT (1) HOT (2)
(black)
AXLink
connector
RE-DM4
(pack 1)
connector
(black)
AXLink
RE-DM4
(pack 1)