Filter
Top Products
Radia Lighting System Configuration Pages
33
RE-DM4 and RE-DM6 RADIA Eclipse Dimmer Modules
Device Configuration Page
This page provides the ability to name your specific Radia device by typing an installation-specific label
in the Lighting Area Name field (FIG. 31).
To configure a particular device from the Device Configuration page:
1. In the main Radia Configuration Manager page, click the Configure button.
2. In the Lighting Area Name field, enter a descriptive name for the area.
3. For each dimmer, change the name in the Label field if necessary.
4. For each dimmer, change the Curve selected in the dropdown menu if necessary.
5. For each dimmer, change the level with the Level slidebar if necessary. The field to the right of the
slidebar will display the exact level. Alternately, enter the exact level you wish to have associated
with that dimmer by entering the number into the field to the right of the slidebar, and the slidebar
will move to match the entry.
FIG. 31 Device Configuration Page
Although the Lighting Area Name field can accept over 200 characters, choosing a
short but descriptive name for the lighting area is highly recommended.