Filter
Top Products
Chapter 2 Monitoring the System
Monitoring a UPS
2-24
Cisco ICS 7750 Administration and Troubleshooting Guide
78-10169-02 Rev. B0
While the system is attempting to communicate with the UPS, the first screen of
the SNMP/Web Card Management Wizard continues to be displayed (this process
might take several minutes). When the system is ready for you to continue with
configuring the UPS, the Found An Unconfigured Management Card dialog box
displays.
Step 4 Enter the following information in the Found An Unconfigured Management Card
dialog box:
• In the System IP Address field, enter the UPS IP address.
• In the Subnet Mask field, enter the Cisco ICS 7750 subnet mask.
• In the Default Gateway field, enter the IP address of the SPE running
System Manager.
• Check the Start a Web browser when finished check box.
Step 5 Click Finish.
A dialog box displays, informing you that your default Web browser will start and
that your User Name and password for UPS configuration will be apc.
Step 6 Click OK.
Step 7 Click Next.
Step 8 In the Installation Options dialog box, choose Express.
Step 9 Click Next.
Step 10 Choose the type of connection (LAN) that you are using to communicate with the
UPS.
Step 11 Click Next.
Step 12 Click Close.
Step 13 Click OK.
Step 14 If a Web browser (Netscape Communicator or Microsoft Internet Explorer, for
example) is not already running, open it. Enter your UPS IP address in the
Location or Address field of the browser.
The Username and Password Required dialog box displays.
Step 15 In the User Name and Password fields, enter apc.
Step 16 Click OK.
The APC Status Summary page appears in your browser.