Filter
Top Products
Chapter 2 Monitoring the System
Monitoring a UPS
2-26
Cisco ICS 7750 Administration and Troubleshooting Guide
78-10169-02 Rev. B0
Step 32 Log in as an administrator (userID administrator), and enter your password (the
default is changeme).
Step 33 Enter the following command to stop the FMMServer on the SPE:
net stop FmmServer
Step 34 Change to the FMM directory:
cd Program Files\Cisco Systems\ics\FMM
Step 35 Install the UPS:
installups
Step 36 Start FmmServer:
net start FmmServer
Step 37 Set the host name of the UPS, where Name is the UPS IP address:
SetUPSHostName -HostName
Name
Step 38 Continue with “Verifying That the Cisco ICS 7750 Can Communicate with the
UPS” on page 2-26.
Verifying That the Cisco ICS 7750 Can Communicate with the UPS
Complete the following steps to verify that the Cisco ICS 7750 can communicate
with the UPS:
Step 1 On the PC, choose Start > Run.
Step 2 Open a Telnet session with the SPE running System Manager:
telnet
IP address
5000
Step 3 Log in as an administrator (userID administrator), and enter your password (the
default is changeme).
Step 4 Change to the FMM directory:
cd Program Files\Cisco Systems\ics\FMM