Filter
Top Products
7Gently but firmly hold the keyboard to the other parts of the computer.
8While holding the keyboard down, replace the three screws on the bottom of the
PowerBook.
Replace the right and left screws first, and the middle screw last.
Not too tight: Take ca re not to overtighten the screws. Tighten them only until
they are snug (when you feel resistance to your turning motion). It’s better to
leave them a bit loose than to make the screws too tight.
9 Turn over the PowerBook and prepare to use it.
Replace the battery and reconnect the power adapter and any cables you
removed before installing the RAM expansion card.
1 Gently but firmly squeeze the
keyboard and the other parts of
the computer together.
2 While squeezing the parts together,
reinstall the three screws into the bottom
of the computer.
165
Installing a RAM Expansion Card