Filter
Top Products
4Hold the module by the gripping surface and pull it out of the computer.
IMPORTANT
You should not remove an expansion bay module if it is in use or
you may lose data. If you try to remove the module when it is in use, you’ll
see a message telling you to reinsert it. Reinsert the module, close any files
and quit any programs using the floppy disk or other medium, then drag the
medium’s icon to the Trash or choose Put Away from the File menu.
If you put your computer to sleep while a floppy disk or other medium is
inserted, the module’s green in-use light will flash (similar to the sleep
indicator light on your computer’s display). Do not remove the module while
the in-use light is flashing.
Inserting an expansion bay module
To reinsert the expansion bay module, slide the module in. Make sure the
gripping surface is facing down. The release latch automatically returns to the
locked position.
Hold the module by the gripping surface
and pull it completely out of the computer.
The module release latch automatically slides back
into its proper position as you remove the module.
Gripping surface
39
Using Expansion Bay Modules and PC Cards