132 - PowerBook G4 (12-inch) Take Apart
Inverter Board (and Antenna Cable Assembly)
Inverter Board (and Antenna
Cable Assembly)
Tools
This procedure requires the following tools:
• Phillips #0 screwdriver
• Black stick or other nonconductive plastic or nylon tool
Note: To organize the screws you remove from the computer, use a tray with divided
compartments (such as a plastic ice cube tray).
Part Location
Preliminary Steps
Before you begin, remove the following:
• Battery
• Memory door and memory card
• AirPort Extreme Card, if installed
• Keyboard
• Top case
• Reed switch (or hall effect sensor board)