Filter
Top Products
PowerBook G4 (12-inch) Take Apart - 45
DC-to-DC Board
DC-to-DC Board
Tools
This procedure requires the following tools:
• #0 Phillips screwdriver (magnetized preferred)
• Black stick (or other nonconductive nylon or plastic flat-blade tool)
• 4 mm socket wrench or needlenose pliers
Note: To organize the screws you remove from the computer, use a tray with divided
compartments (such as a plastic ice cube tray).
Part Location
Note: Although this section pictures the DC-to-DC board used in the PowerBook G4 (12-
inch DVI) model, the procedure is the same for both models.