Filter
Top Products
PowerBook G4 (1GHz/867MHz) Memory -
4
11. Touch the computer’s inside framework (a dull gray conductive composite material) to
discharge any static electricity, as shown
(Figure 5)
.
Important:
To avoid electrostatic discharge damage, always ground yourself by
touching the computer’s framework before you touch any parts or install any
components inside the computer. To avoid static electricity building back up in your
body, do not walk around the room until you have completed your installation and
closed the computer.
Figure 5
Removing the Installed Memory Card
1. To remove a memory card, locate the brackets that secure the card on both sides
(Figure 6)
. Carefully spread the brackets apart until the card releases on each side.
Pull the card up and out.
Note:
If there is a memory card in the upper memory slot
(Figure 6A)
, it must be
removed before removing a card in the lower slot
(Figure 6B)
.
Figure 6
A
B