Filter
Top Products
PowerBook G4 (1GHz/867MHz) Logic Board - 2
Procedure
1. With the display open and the keyboard removed, remove the T8 screw near the heat
pipe.
2. Disconnect the PC card flex cable connector and the keyed battery connector.
Important: If the battery connector has not been disconnected before, the keyed
connector may be tight. If necessary, use a black stick or needle nose pliers to
loosen one side of the connector and then the other side. Then insert the black stick
under the cables to pry up and disconnect the connector.
Replacement Note: When reassembling the computer, tuck down the battery cables
so they do not get in the way when the keyboard is installed.