Filter
Top Products
PowerBook G4 (1GHz/867MHz) AirPort Card- 8
Closing the Computer
1. To attach the bottom case, align the notches on the right and left sides of the case,
then press down slightly to secure the case. Check the alignment of the seven screw
holes to make sure the bottom case is properly positioned.
Important: Make sure that the seams between the bottom case and the frame are
closed. Check the outside edges and around the battery well. Verify that the
alignment tab on the underside of the bottom case (Figure 12A) has seated, and the
case lies flat.
2. Replace the seven screws in the order shown. (Figure 12)
Note: The screws must go in straight and easily; if they do not, readjust the bottom
case for proper alignment. Do not overtighten the screws or damage could result.
Important: To avoid damaging the case, be careful that the screwdriver tip does not
slip out of the screw head during tightening.
Figure 12
2
1
6
4
5
7
3
A