Filter
Top Products
22 Chapter 2 The Basics
To extend the reach of your power adapter, remove the AC plug from the adapter.
Attach the included AC cord to the adapter and insert the other end into a wall outlet.
Use only the AC cord that came with your power adapter. Make sure to push the power
plug snugly into the power adapter port on the computer to ensure it is engaged and
power is flowing to the computer.
When disconnecting the power adapter from an outlet or from the computer, pull the
plug, not the cord.
For safety instructions about using your power adapter, see “Plugging In the Power
Adapter” on page 67.
Using the Trackpad
The trackpad is sensitive to how quickly you move your finger. To move the pointer a
short distance across the screen, move your finger slowly across the trackpad. The
faster you move your finger, the farther the pointer moves on the screen.
Warning: Make sure the power adapter is fully assembled before plugging it into an
electrical outlet. If you’re using the AC plug with your power adapter, make sure the
two prongs are snapped into their completely extended position before plugging in
the adapter.
AC cord AC plug
Tips for Using the Trackpad
For best results when using the trackpad, keep in mind these tips:
• Use only one finger. Using more than one finger may cause erratic pointer
behavior.
• Do not use a pen or any other object.
• Keep your finger and the trackpad dry. If the trackpad becomes moist from
humidity or condensation, gently wipe it with a clean cloth before you use it.
• Never use any kind of cleaning solution on the trackpad.
For more information on using the trackpad, choose Help > Mac Help from the menu
bar at the top of the screen.
LL2507.book Page 22 Thursday, March 11, 2004 5:16 PM