Apple MC270LL/A Personal Computer User Manual


 
27Chapter 2 Life with Your Mac mini
Pairing Your Apple Remote
TomakesurethatyourMacminicanbecontrolledbyonlyyourAppleRemote,you
can“pair”them.ThisishelpfulifyouuseyourMacminiwherethereareotherMac
computers,televisions,audioequipment,orotherdevicesthatuseaninfraredremote.
To pair the Apple Remote and your Mac mini:
1 PointtheremoteattheIRreceiveronthefrontofyourMacminifromadistanceof
3to4inches(8to10cm).
2 PressandholdtheRightandMenu(»)buttonssimultaneouslyfor5seconds.
Afterpairing,achainlink( )symbolappearsonscreen.
To unpair the Apple Remote and your Mac mini:
1 ChooseApple()>SystemPreferencesfromthemenubar.
2 ClickSecurity,andthenclickUnpair.
Replacing the Battery
TheAppleRemotecomeswithareplaceableCR2032battery.
To replace the battery:
1 Useacointoremovethebatterycoverfromthebackoftheremote.
Battery
compartment
2 InsertafreshCR2032battery,withthepositive(+)sideup.
3 Replacethecoveranduseacointolockitinplace.